- Wooden stair products are selected by many homeowners for their homes. It is difficult to have any type of stair material with impressive beauty, ensuring the aesthetics as well as the safety as wooden stairs.
- A beautiful wooden staircase will bring an unforgettable impression to the guests visiting your home. Wooden stairs with unique creative designs will make a difference for your home architecture. If you are thinking of owning a wooden staircase for your beautiful house, please refer to Morehome's interior with the wooden staircase construction process below.
Process of construction and installation of wooden stairs
Step 1: Install the wooden stair surface
There are 3 basic ways to install wooden stair surface easily:
Step 2: Assemble the neck of the wooden stairs
- The neck steps will be cladded into the surface of ancient wooden steps perpendicular to the surface of wooden stairs. Then, spread the glue on the surface of the neck of the concrete steps, then place the surface of the neck of the wooden steps on top and use a hammer to compress the neck of the wooden steps on the concrete neck surface to fix and ensure the certainty and balance for the neck steps. Finally, fix the neck with nails 4 at 4 corners of the neck.
Step 3: Install the vehicle
- First, you need to drill the hole down the step surface to create screw holes. Depending on the wishes of the owner as well as the different buildings, the distance between the holes and the vehicles will be different but the usual distance will be 150-200 mm. Next, combine the screw and step with 2 screws, glue these 2 components.
Step 4: Install handrails of wooden stairs
- Make a hole under the handrail with the head above the lathe about 20 mm deep and this vehicle will be fitted to the armrest with a two-component glue.
Step 5: Install wall wool brace
- The first is to use a saw to cut the steps and put the wool brace inside. The brace is about 1.5 cm thick and 8 to 9 cm wide and is secured by screws.
